GLO INDUSTRIES INC.
MATERIAL SAFETY DATA SHEETS INFORMATION (MSDS)
HEALTH WARNINGS ARE
AT THE END OF THIS HANDY ELECTRONIC DOCUMENT (To be used as general
reference only. Official
sheets available upon request and/or shiped with products.)
PREPARATION DATE:
8-21-95 SUPERSEDES 8-18-93
MANUFACTURER:
GLO INDUSTRIES INC. 111 Wooding, P.O. Box 81, Aberdeen WA 98520
EMERGENCY PHONE NUMBER:
360-532-1178 until 5:00 PM PT. 360-482-4898
after 5:00 PM PT. INFORMATION NUMBER: 1-800-310-6332
1. HAZARDOUS INGREDIENTS:
Diesel > 5%, Kerosene > 5%
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29
CFR
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 355 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 128 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
1. HAZARDOUS INGREDIENTS:
Diesel > 5%, Kerosene > 5%
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 332 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 112 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
1. HAZARDOUS INGREDIENTS:
NONE
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 624 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 128 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
1. HAZARDOUS INGREDIENTS:
NONE
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 393 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 132 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
1. HAZARDOUS INGREDIENTS:
NONE
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 420 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 152 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
PRODUCT NAME: MS. PAL
1. HAZARDOUS INGREDIENTS:
NONE
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 624 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 128 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
1. HAZARDOUS INGREDIENTS:
Diesel > 5%, Kerosene > 5%
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 366 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 128 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
VOC less than 250 micrograms per kilogram (Not required for penetrating
or lubricating oils, but tests were run .)
1. HAZARDOUS INGREDIENTS:
Diesel > 5%, Kerosene > 5%
NO WARNINGS ARE REQUIRED FOR THIS PRODUCT AS CLASSIFIED BY 29 CFR
1910:1200 AND 29 CFR 1915.2(S).
This material is protected by trade process secrets.
CLASSIFIED AS A CLASS III COMBUSTIBLE...SHIP CLASS 65
2. PHYSICAL DATA:
BOILING POINT: 330 Deg. F.
METHOD USED: DISTILLATION BY ASTM D-86
VAPOR DENSITY: N/A SPECIFIC GRAVITY: 0.80 - 0.90
MELTING POINT: N/A EVAPORATION RATE: >0.50
(BUTYL ACETATE =1)
SOLUBILITY IN WATER : Very slight.
3. FIRE AND EXPLOSION DATA:
FLASH POINT: 132 Deg. F.
METHOD USED: PMCC.
FLAMMABLE LIMITS: N/A LEL: N/A ; UEL: N/A
EXTINGUISHING MEDIA: Carbon Dioxide ( CO2), dry chemical, foam.
UNUSUAL FIRE & EXPLOSION HAZARDS: NONE.
Treat as class III combustible.
FIRE FIGHTING EQUIPMENT: Use breathing apparatus in confined spaces.
4. REACTIVITY DATA:
STABILITY: Avoid temperatures greater than 100 Deg. C or 212 Deg.
F.
INCOMPATIBILITY: (MATERIALS TO AVOID) Strong Oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: None, heavy smoke.
5.
VOC DATA:
OSHA / EPA TARGETED VOLATILE ORGANIC COMPOUNDS :
LESS THAN &l; trillion; 5.3 GRAMS PER LITER; LESS THAN &l;
trillion;
0 (Trace) CLOR. HYDRO. LESS THAN 1 trillion
0.18 OZ. PER POUND; LESS THAN &l; trillion;
1.4 FL. OZ PER GALLON; LESS THAN &l; trillion;
0.08 LBS. PER GAL. (Total)
as per Spectra Laboratories,
Address: 2221 Ross Way ,Tacoma WA. (206) 272-4850 project #S507-142,
Spectra #4981
6. RELATIVE HEALTH HAZARD
DATA FOR ALL NON-HAZARDOUS OILS IN GENERAL: (PAL OILS ARE CLASSIFIED AS
NON-HAZARDOUS.)
EYES: Can cause irritation, redness, tearing, blurred vision.
SKIN CONTACT: Prolong or repeated contact can possibly cause irritation
dermatitis.
SKIN CONTACT: Wash with soap and water. INGESTION: Do not induce vomiting,
call physician.
7. SPILL AND LEAK PROCEDURES:
Handle as an oil spill. Soak up with oil absorbent material and dispose
according to local, state and federal regulations.
8. PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Do not store at elevated temperatures ( 130 Deg. F) for long periods.
9. SPECIAL PROTECTION INFORMATION:
RESPIRATORY PROTECTION: Allow for adequate ventilation. FOR HANDS, BODY:
Oil resistant gloves and clothes are recommended. EYE PROTECTION: Use safety
goggles.
WORK PLACE HYGIENIC PRACTICES: Wash
hands after handling. If spilled on clothes change them.
A LITTLE BIT ABOUT VOC
DATA: (Volatile Organic Compounds)
What are these compounds? The EPA has a list of certain solvents and
compounds that release vapors into the air, and many of these are harmful
to the people using these compounds, or to the ozone layer, etc. This is
an extensive list, but to give the reader a general idea we are speaking
of Toluenes, Ketones, Alcohols, Clorinated compounds such as Tricloroethanes,
and many others. Most of these are found in paints and are sometimes are
called "solvents". Some are used as fire retardants, others as carriers
to keep certain plastics or polymers in liquid form.
Most of the industries that have to comply to all the Federal regulations
have independent laboritories test their products, and we here at GLO Industries
follow this format.
The PAL Oil System has only one product that may have required this
test and that is our Metal PAL Preservative. We had those tests run anyway
for the Navy, and the Military also re-tests as a check. Most limits set
for these various dangerous compounds are based upon parts per million.
That is not good enough for our standards. Our products are based on parts
per BILLION OR TRILLION.
Metal PAL Preservative example: OSHA / EPA TARGETED VOLATILE ORGANIC COMPOUNDS
:
LESS THAN &l; trillion; 5.3 GRAMS PER LITER; LESS THAN &l; trillion;
0 (Trace) CLOR. HYDRO. LESS THAN 1 trillion 0.18 OZ. PER POUND; LESS THAN
&l; trillion;
1.4 FL. OZ PER GALLON; LESS THAN &l; trillion;
0.08 LBS. PER GAL. (Total)
Now just what does this mean to you? It means if you buy a gallon of plastic
or oil based paint and it scales in at ten pounds, on the average it is
going to release 5 pounds of volatile vapors into the air. If you buy a
gallon of Metal PAL Preservative, it will only release 1.3 OUNCES of these
vapors into the air, and most of these are non-hazardous.
We have been asked many times what is the "safest solvent" to use. The
answer is water! Are you surprised? Yes, water is most often called the
universal solvent. Of course if the water has been clorinated, such as
city drinking water which in some cases has also been treated with sodium
floride, then mixed with noodles that have a teaspoon of cooking oil added
plus flavoring, and then everything is boiled... you will have created
a "clorinated" hydrocarbon somewhere. Most likely mom calls it "soup"...
The CFR's are government guidelines and the ones we have listed are for
shipyards and ships, which is resonable for PAL products are Marine Oils.
The list of CFR's our products would comply to would fill a book. If you
require a different classification, check the government guidelines first.
If you already have a classification you should know if PAL products fall
into your catagory by checking the MSDS sheet data. If you do not know
how to do this, check the Federal Government listings out on the Web and
ask the proper agency for help.
NATIONAL FIRE FIGHTING CODE
All PAL Products come under this classification: Harzards:
0, Health: 0-2, Treat as combustible mineral oil or #2 fuel. Spontaneous
combustion point unknown, but extremely high.
THE PAL CORNER SITES AND LINKS TO THE WORLD
Return to HOME PAGE